|
Wardsweb's Bottlehead Paramour Build
|
|
|
I have omitted soldering to terminals #24 and #22 and
then to the binding posts.
Here I chose to take the secondary wires from the output transformer and solder
direct to the binding posts.
The black wire (common) to the black post and the white wire (8 ohms) to the
red post.
The grey wire (4 ohms) was tipped with some shrink wrap and left just in case
I want to use it later.
Note the wire colors in the manual are black, yellow
and white. Mine were black, grey and white.
