Wardsweb's Bottlehead S.E.X. Amp Build

<<-- Previous   --Index--   Next -->>

Cut two 2" long pieces of Teflon coated wire and strip back the ends 1/4"
On one plate choke attach the 2" wire from terminal 8 to terminal 1 and solder both connections.

Repeat this process for the other plate choke.
Remember that the plate chokes are rotated 180 degrees with respect to each other.
Double check the terminal numbering before attaching.

Image 22 of 104  -  76 kB

<<-- Previous   --Index--   Next -->>

back to main amp page